Get Support

If you encounter some issues with Leo scanner, ask for support. If the issue is severe, the scanner may enter Recovery mode.

Send Report from Leo

To contact support, you can use Leo menu. Scanner has a form, where you can attach logs and provide detailed information. If you specified a different contact email in Settings, you’ll receive an answer to this email address.

Figure 52 Support section in scanner settings.

To contact the support team from Leo, perform the following steps:

1. In the Project screen, tap Settings.

2. Ensure that your scanner is connected to the Internet.

3. Select the Support section.

4. Tap Send report.

5. Type detailed information related to the issue you experienced.

6. Tap Next. 1

Figure 53 Sending report.

7. Turn on the Attach scanner logs toggle.

   Important

   Leo won’t send any stored scans from your projects.

8. Tap Capture test scans, if your issue relates to scanning.

   1. Warm up the scanner in ‘Preview’ mode for at least 20 minutes beforehand.

   2. Tap Capture test scans and direct the scanner at a wall.

   3. During the capture process, it is important to slowly move the scanner back and forth repeatedly within the distance of 500 - 1000 mm from the wall.

   4. Tap Start to initiate the capture process.

9. Tap Send. Wait for the device to collect and send the required information to Artec.

1

You can store your entered text and continue editing the report later. Tap the Save button to this end.

Reset PIN Code

If you forget your unlock PIN Code or accidentally enter the wrong pin three times in a row, our system will automatically invalidate your PIN Code. This security procedure ensures that a stranger won’t be able to access your data by simply ‘guessing’ your pin.

Figure 54 Reset your PIN Code.

You can reset your PIN Code using either of the following ways.

Online Recovery : When Leo is connected to the internet

1. On the error message screen, tap on Reset code.

2. You’ll be prompted to enter your MyArtec account password. Enter your password.

3. Click on Proceed.

4. Reset your PIN Code and confirm it.

Offline Recovery : When Leo is NOT connected to the internet

You need a computer or phone with internet connection for the following steps.

1. Login to your MyArtec account online → Scanner section.

2. Select your device from your device list and click on the Reset Leo PIN Code link.

3. Now, on the Leo error message screen, tap on :Reset code. A reset code will be generated and displayed on your Leo screen.

4. Enter the reset code generated from Leo on your computer and click on Get response code. A response code will be generated and displayed on your computer screen.

5. Now, enter this response code on your Leo device.

Figure 55 Response code on Leo screen.

6. Click on Proceed.

7. Reset your PIN Code and confirm it.

Enable Support Access

Some cases may require for the support team to have an access to your Leo. To enable this access, use the procedure below:

1. In the Project screen, tap Settings.

2. Select the Support section.

3. Tap Allow remote access. The icon will appear in the status bar.

Locate Serial Number

You can locate the serial number of your Leo using either of the following ways:

In the Project screen, tap Settings → Scanner → Advanced
Access my.artec3d → Scanners section
Look at the bottom of the battery housing or retrieve the serial number sticker from the envelope
Detach the scanner handle using the hex key (2 mm) and locate the serial number in the attaching point.