Projects and Scans

Once Leo has booted up, the Project screen appears. Scanner allows you to view projects and scans on its display (Open Project), continue scanning to the existing scan, add new scans to the project and copy them to an SD memory card.

By default, the most recent project is available on the left of the screen. To invert the order, tap the Date link in the top right corner.

Project Structure

Any Leo project includes at least one scan. If the scan was paused or interrupted and then resumed, an addition appears in the History section of the Scanning screen. You can undo each addition sequentially by navigating the History backwards.

_images/project_structure.svg

Figure 14 Understanding project structure.

Open Project

To open a project,

  1. Access the Projects screen.

  2. Scroll the list horizontally while consulting the preview images.

  3. Then tap the required project. Leo will display the project structure where you can either add a new scan or continue recording to the existing one.

_images/project.png

Figure 15 Scans in a project.

View 3D Data

Use the following gestures to navigate 3D content on Artec Leo.

Rotate

Move one finger across the screen around the scene.

Pan

Move two fingers across the screen.

Zoom

Use two fingers: spread them apart to zoom in and move them toward each other to zoom out.

To bring back and scale the possibly moved away 3D content, use the Fit to view button.

_images/le_view_prj.png

Figure 16 Viewing a project.

Upload Project to Artec Cloud

Using Artec Leo, you can now upload your projects directly to Artec Cloud without needing SD cards or cables. Artec Cloud is an easy-to-use collaborative platform that makes your 3D scan data available to you anytime and anywhere.

To upload one or several projects to Artec Cloud:

  1. Access the Projects screen.

  2. Tap the Select button.

  3. Select the items that you want to upload.

  4. Tap Upload to Cloud. Artec Leo will automatically upload the items to your Artec Cloud account.

_images/le_uploadtocloud.png

Figure 17 Uploading to Cloud.

Note

Please ensure that your Cloud account has enough storage space before uploading large projects. Also, make sure Leo is connected to the internet until the upload is completed.

Attention

The ‘Upload to Cloud’ functionality is available to Artec Cloud users with a Trial, Collaboration, or Processing license only. Check the Artec 3D website for more information about Artec Cloud licenses.

Rename Project

To rename a project, open the project and open any scan inside the project. On the scan-viewing window, simply tap on the Project name, or click on the Edit icon at the end of the name field, and change the name.

Copy Project or Scan to microSD Card

Attention

To ensure that a trusted account user will be able to open a project from Leo, first renew the scanner configuration.

To copy one or several projects to SD card,

  1. Insert a microSD card into Leo.

  2. Access the Projects screen.

  3. Tap the Select button.

  4. Select the items that you want to copy.

  5. Tap Copy to SD. Wait for a progress ring to go off.

  6. If the SD card is full before copying all items, insert a new card into Leo. Leo will continue copying the remaining items to the new card.

Copy Scan

To copy scans from the project, before step 3 in the procedure, open the required project. Then continue the procedure.

Remove Project or Scan

To delete one or several projects,

  1. Access the Projects screen.

  2. Tap the Select button.

  3. Select the items that you want to remove.

  4. Tap Move to bin. Artec Leo will move the items to the Bin.

Remove Scan

To delete scans from the project, before step No. 2 in the procedure, open the required project.

Access Deleted Projects and Scans

To access the deleted scans and projects:

  1. Open the Projects screen.

  2. Tap the Bin button. Leo will open the Trash bin showing all deleted scans.

Note

Any deleted project will split into scans once it appears in the Trash bin.

Leo lists all the deleted scans by time created. Scans are named using the Project 2/1 pattern meaning that it is the Scan 1 from the Project 2.

To select scans in the Trash bin, tap them. To select all items at once, use the Select all button.

To restore scans

To delete scans

Tap Restore. The scans will then appear in their respective projects.

Tap Delete. The scans will be permanently deleted from Leo.

Capture Screenshots

You can capture screenshots in Leo and export it to a microSD card. To take a screenshot of the Leo screen:

  1. Simultaneously press and release the power button and the start/stop button redbut.

  2. Insert a microSD card into Leo.

  3. Select SettingsScannerMove screenshots to SD card.

Note

Screenshots are saved in Leo’s internal memory and can’t be viewed on Leo. They will be stored internally until you log out of Leo or move them to the microSD card.

Trusted Accounts

Only specific users can open projects from Leo in Artec Studio:

  • Scanner owner

  • Users from the Trusted accounts list.

To grant the specific user an access to your Leo projects, follow the steps:

  1. Open my.artec3d.

  2. Access the Scanners section.

  3. Scroll to the Trusted account title.

  4. Click the add link.

  5. Enter the email address of this my.artec3d user.

  6. Access Projects on Leo.

  7. Tap Settings

  8. Then select ScannerGeneralSystem.

  9. Tap Renew in the Scanner configuration field.

_images/le_mya_trusted.png

Figure 18 Trusted accounts for Leo.

Attention

If you plan to share a project with someone from the Trusted accounts list by copying a project to a microSD card, first ensure that you have renewed the scanner configuration.

Open Project in Artec Studio

Leo produces raw scans that you can process in Artec Studio no older than version 13. It is possible to import projects from Artec Leo either over a network (Direct Import in Artec Studio) or using a microSD card.

Important

The account you use in Artec Installation Center must be either the same as on Leo scanner or one of the Trusted accounts list at my.artec3d.

Important

If you scanned with the Remove base enabled, ensure that the Launch base removal for Leo scans checkbox is selected in Artec Studio settings.

Direct Import in Artec Studio

To successfully import a project from Leo,

  1. Ensure that your computer and Leo are connected to the same network.

  2. Ensure that Leo doesn’t displays any 3D data.

    • If the device is scanning, cease the session.

    • If any project is open, close it.

  3. Open Artec Studio.

  4. Select FileImportLeo project (connect to scanner).

  5. Choose the scanner from the list and click Connect.

  6. Select the required project from the project list and click Import.

_images/4_leo_prj.png

Figure 19 Importing project to Artec Studio.

Once the application imports files, scans will appear in the Workspace panel. The imported project and scans will be automatically grouped — the group with the project name will be divided into subgroups of scans (see here about grouping in Workspace panel).

Use microSD card

In order to process 3D data from Artec Leo, first insert a microSD card into Leo. Then perform the following actions:

Caution

Strictly follow the instructions given in the MicroSD Memory Card section.

_images/microsd.svg
  1. Copy data from device’s internal storage to SD card.

  2. Remove the microSD card from Leo.

  3. Insert the card into a microSD reader connected to the computer with the installed Artec Studio.

  4. Copy files to this computer.

  5. Open Artec Studio.

  6. Select FileImportLeo project.

  7. Navigate the folder tree to the required project.

Important

HD data is not saved in the project copy on the microSD card. In order to save HD data on the microSD card, the projects must be encrypted (Encrypt Projects to Export).

Process Project in Artec Studio

Once you import the project, process it as Artec Studio Manual suggests.

Important

Double check that the Current scanner type is set as Artec Leo in Artec Studio settings (Scan → Algorithm settings).

Autopilot

One of the convenient ways to process the scanned data from Leo is through using Autopilot. As soon as you import a Leo scan in Artec Studio, select Autopilot in the left toolbar.